Raspberry Pi Login¶

Introduction¶

This document describes how to log in to Raspberry Pi using a remote terminal via SSH protocol.

Note

The SSH stands for “Secure Shell”. In a simple way, this can be seen as a secure connection to the Raspberry Pi command line over the network.

If you do not already have Raspberry Pi installed, first go to the document Raspberry Pi Installation.

You can log in two ways:

Log in via:¶

IP adress¶

In this case, you need to find out what address the DHCP server assigned to your Raspberry Pi.

Tip

Finding Raspberry Pi IP address

The client’s IP address can usually be found through the configuration interface of your router in the section DHCP Clients, eventually LAN Status, etc.

On your computer use utility like Advanced IP scanner (Windows) or IP Scaner (Mac).

On your Android or iOS phone you can use Fing utility which can detect Raspberry Pi and show an raspberry icon with the device.

DNS name¶

For our HARDWARIO Raspbian we are using hub.local
Original Raspbian using raspberry.local

Connect¶

Windows¶

Download the PuTTY program.

Then log in with following login:

username: pi
password: raspberry

Linux and macOS¶

Open Terminal application and enter following command:
- ssh pi@hub.local
- Or with IP adress instead of DNS name ssh pi@IP_ADRESS instead of IP_ADRESS fill ip adress from finder in Introduction chapter
Log in with following login:
- username: pi
- password: raspberry

Changing the password¶

Remember to change the default password when you first login. You can make the change using the following command:

passwd

System Update¶

For reasons of security and stability, it is important to keep the system up to date. The system consists of packages and you can update them with the following command:

sudo apt update && sudo apt upgrade